Head azimuth software (C64) - Loadstar / Azimuth 3000
Posted: 03/08/2009 - 17:02
Such a handy tool for calibration:
http://www.concept-single.net/Azimuth_3000.htm
Copy the TAP back to a cassette and you'll be able to keep the azimuth in check. (Of course, you'll have to have a well calibrated device to copy it back with, otherwise the only thing you'll line up your Datassettes with would be the calibrator itself.)
________________________________________
http://noname.c64.org/csdb/release/?id=49944
________________________________________
COMMODORE FORMAT issue 27. The instructions are exactly the same.
http://www.concept-single.net/Azimuth_3000.htm
Copy the TAP back to a cassette and you'll be able to keep the azimuth in check. (Of course, you'll have to have a well calibrated device to copy it back with, otherwise the only thing you'll line up your Datassettes with would be the calibrator itself.)
________________________________________
http://noname.c64.org/csdb/release/?id=49944
________________________________________
COMMODORE FORMAT issue 27. The instructions are exactly the same.