Page 2 of 2

Re: C64 FASTFINGERS Lead Synth TO BE RE-RELEASED

Posted: 02/03/2012 - 1:52
by techristian
Lightshow for C64 Fastfingers.




Dan

Re: C64 FASTFINGERS Lead Synth TO BE RE-RELEASED

Posted: 06/03/2012 - 7:21
by LMan
Nice touch :D Very avant-garde

Re: C64 FASTFINGERS Lead Synth TO BE RE-RELEASED

Posted: 21/03/2012 - 4:10
by techristian
Today I began BASIC MIDI routines with the C64 Expansion Port Sentech/Passport type MIDI interface, mostly to check my MIDI interface and also to re-familiarize myself with the MIDI commands. I was able to get my Kawai K3 to play a slew of notes which I sent to it by way of a fornext loop. So the MIDI programming re-begins..after almost 30 years. So hopefully I will be able to integrate this into Fastfingers. This in only HALF of the BASIC programming. The other HALF is to also RECEIVE notes from a MIDI keyboard to trigger the Fastfingers sounds.

The PASSPORT type MIDI interface was the most popular, and it is not easy to make a universal MIDI driver because of the way the DATA and CONTROL/STATUS registers work. There is only ONE STATUS register on the PASSPORT and the same register is also the CONTROL register. Many other MIDI interfaces will use 2 separate registers for STATUS AND CONTROL. The same goes with the DATA register. It also flips so that it can be a READ or WRITE register.

So what I'm basically saying. Is to start shopping for a PASSPORT type MIDI interface if you plan on using Fastfingers ,in the future, with MIDI.

Dan

Re: C64 FASTFINGERS Lead Synth TO BE RE-RELEASED

Posted: 06/12/2012 - 22:33
by techristian

Re: C64 FASTFINGERS Lead Synth TO BE RE-RELEASED

Posted: 29/12/2012 - 18:26
by techristian
We have the beginnings of MIDI for Fastfingers now. Go to http://musicinit.com/fastfingers.php for all new updates and latest youtube videos.

Dan

Re: C64 FASTFINGERS Lead Synth TO BE RE-RELEASED

Posted: 27/09/2013 - 16:14
by techristian
DON'T BUY THIS CONNECTOR for c64 expansion port

It may look like a 24 pin connector, but the top and bottom pins are shorted together. I know. I'm stuck with 20 of these. I bought them for my new MIDI interface. Shipping and "return charges" will apply so I'm holding on to these.

http://www.ebay.ca/itm/NEW-2-x-12-row-C ... 1164488716

Dan